The 3 BIG Tips To Wisely Buying A Used Front Load Washing Machine

Posted on: 12 February 2016

Share

With the capability of washing a load of clothes with a small amount of water, quiet rotation action, and super efficiency all the way around, a front load washing machine is a desirable appliance for a lot of reasons. If you spot one of these washers in a used appliance store, there is no doubt that you will be drawn to it over the top-load counterparts. However, front-loading washing machines can have their problems if they are improperly used and maintained by their previous owners. There are a few tips you can use before you buy a used front-load washer at a used appliance store to make sure you don't end up with an appliance that has been mistreated. 

Open the door of the washer and take a deep breath. 

Swing open the door of any washer you are seriously considering and take a whiff. Front-loading washers are notorious for emitting bad odors when they have not been treated well by their owners. The lingering odor comes from mold and mildew that has been allowed to collect inside of the washer beneath the tub. This comes from not allowing the washer to air out, leaving washed laundry sealed inside too long, and using too much detergent. If the washer smells even faintly odd, it is best to stay away from it. 

Carefully inspect the rubber seal of the washing machine.

The rubber seal around the door serves the vital purpose of keeping water from seeping through. Therefore, it should be in the best condition, showing no signs of damage and being completely flexible. If you spot damages or the seal is rigid in spots, there is a good chance the washer will leak when it is in action. Additionally, mold and mildew can collect around the and under the seal of a washing machine that has not been properly maintained and used. So pull back the seal slightly and look for signs of grime or debris. 

Pull out the soap dispenser tray and take a long, hard look. 

Front load washing machine manufacturers recommend using only high-efficiency detergents and only in recommended quantities. This is because normal detergents, or even high-efficiency detergent in large amounts, will clog up the inner drainage system of the washer, which will lead to drainage issues and contribute to mold problems. You can usually spot signs of wrongful detergent use in and around the soap dispenser tray. You may feel a grimy residue in the compartment or even see soap scum buildup. If you see these signs, it will probably be best for you to move on to a different appliance. Click here for more information.